Rubber isolation pads categories: 1) the material can be divided into natural rubber and synthetic rubber into two categories. Natural rubber in the physical machinery of superior overall performance, and synthetic rubber in certain special properties, such as oil, anti-aging, acid, ozone, temperature and other aspects of the more prominent. http://www.jkgssb.com/Product-20110688.html 
 2) the isolation pads can be divided into flat-type, pressure type, shear type. The isolation effect, the pressure better than flat-plate type, shear stress than type. 
 3) Shore hardness divided by 40, 60 and 80 are three different Shore hardness of the isolation pads in the same load conditions, different from its static compression. 
 Scope: http://www.jkgssb.com 
 For machine tools, presses, forging machines, pumps, fans, compressors, generators, large air-conditioning equipment and other vibration damping device installed. 
 Product Description: 
 1) The product form is divided into: single-or multi-layer superposition two. When used together multi Diego, layer by 2 ~ 6mm thick steel plate apart. 
 2) Product Mark 
 a. Product shall be marked in the following order: product code, vibration isolation pad hardness, vibration cushion the number of each of the basic horizontal vibration isolation pad number. b. Product Code provisions XGD 
 c. marks Example: XGD46-2 
 That hardness of 40 degrees, 6 stacked together to use each basic block for the two rubber isolation pads. 
 3) material 
 a. Make the rubber isolation pads should be natural rubber or synthetic rubber adhesive for the selection of species, should not use recycled plastic. 
 b. When used together multi Diego, layers separated by metal plates for the Q235 steel. Steel surfaces should be to flash, sharp edges, be galvanized.