90 ° rubber elbow 

 Description: 

 WTX rubber elbow ball is within the layer, enhanced multi-layer plastic scratch nylon cord fabric, rubber outer layer composite tubes. http://www.jkgssb.com/Product-20110690.html according to the different media used in rubber materials are also different, with natural rubber, styrene butadiene rubber, butyl rubber, nitrile rubber, EPDM rubber, neoprene rubber, silicone rubber, fluorine rubber and so on. Respectively, with heat, acid, alkali, corrosion resistance, abrasion resistance, oil and other functions. 
 Installation: 
 1 rubber elbow during installation, installation of non-super-displacement limit. 

 2 mounting bolts to be symmetrical, http://www.jkxjjt.com pressure gradually tighten to prevent local leakage. 

 3.1.6MPa more work pressure, pressure pad mounting bolts must be flexible, work to prevent the bolts loose. 

 4 vertical pipe fittings installed at both ends of the vertical force should be supported, http://www.jkgssb.com can be taken to prevent pull-off devices to prevent the working pressure pull off. 
 5 parts of rubber elbow should be installed away from heat. Ozone area is strictly prohibited and the use of strong radiation exposure light products do not meet the requirements of the media. 

 6 Rubber elbows in the transport handling sharp instruments is prohibited when scratched the surface, sealing surface.